Not having the perfect shock absorber causes plenty of stress like back pain in some extreme cases. That’s due to severe vibration when the shocks are really bad. And if the shocks aren’t optimum for your specific model of car, the brakes seem to take longer than they should.
This time we’re talking distinctly about your precious Ford F150, there’s a lot of matchmaking to do when it comes to shocks. Hooking up your F150 with the best shocks for Ford F150 like the ones below will let you enjoy the strengths and efficiencies of the high-end mechanisms your truck has to offer.
7 Best Shocks for Ford f150 4×4
Here are some of the top shocks for Ford f150 4×4 in the market. Let’s get right to the list of our favorites shocks.
1. Rancho RS999910 Quick Lift Loaded Strut
If you are riding on tough grounds, then Rancho RS9999910 is just what the doctor prescribed. It has a premium monotube design that gives it a rugged look as well as long-lasting performance. It possesses a 2.75-inch diameter body allowing it to carry more fluid.
The whole design is made with corrosion-resistant materials so that the body never tarnishes that easily. There is also a hint of liquid mantellic finish on the body giving it an appealing look. Graphite filled Fluon banded & Sintered iron piston ensures that it will serve you a long time.
Rancho allows you to level the front suspension with the rear ones by removing the factory rake. It is capable of clearing away for 35 inches high tire. 9 position tuning technology allows you to adjust for custom rides. It has a wireless technology that allows you to control it from sitting inside.
This shock absorber comes pre-assembled with the coil spring & the upper mount. You can easily install it in your vehicle. If you have any problems, you can contact the manufacturer for a full refund & a lifetime warranty for any defects too.
- Not a good fit for large mud tires
- This level of quality comes at a high price.
2. Monroe 58643 Shock Absorber
If you are looking to replace both of your front or back absorbers, then Monroe 58643 combo would be an excellent addition. The piston has the Fluon band to provide proper sealing to the piston & pressure the tube tightly. The piston has a heavy gauge calibrated spring to help you maintain control.
It contains special modifiers that reduce friction to ensure a better rod reaction. Full displaced valving allows you to automatically adjust to any type of road application & gives you full control over the ride. It gives greater comfort while driving normally & superior control while driving in harsh conditions.
These pairs can handle a ride of up to 1,100 lbs. of additional weight is loaded. They are designed especially for light trucks that carry different load & tow trucks too. It is very easy to install & you need to compress them first.
- It would be a loss if you replace one as they come in pairs.
- They are pre-compressed.
3. Detroit Rear Driver & Passenger Side Shock Absorber
Detroit Axle is a leading manufacturer for original equipment quality aftermarket products. If you’re thinking of replacing your rear side shocks, then this pair would be a great addition to your ford f150.
But you need to make sure it fits your vehicle as they have a fitment with 2004 (New Body Style)-08 Ford F150 Truck 4×4 & 2009-13 Ford F150 Truck 2WD.
These high-quality shocks will serve you great on the road as you will get greater stability. You will feel like riding a new vehicle especially while going off-road. They are great for replacing OEM parts.
It has a direct fit & very easy to install. You won’t need any special tools for the installation process. If you have a budget planned in your head for rear shock absorbers, then this pair will surely perform great with your Ford f150 4×4 vehicle.
- If you are constantly on rough roads, then they might not be as good.
- Not good with extra weight.
4. Bilstein 5100 Series Shock Kit
Blistein 5100 series is a complete set of front ride adjustable & matching rear shocks for Ford f150 4×4. Each of the absorbers has a highly durable steel body that has zinc-plated finishing to protect against corrosion.
All the shocks have a 46mm diameter that can contain a lot of oil with fade-free service. They all have a monotube gas charged design with a digressive piston & self-adjusting valves to allows the shocks to work in different height positions.
With Bilstein, you will be able to level your vehicle just the way you want without sacrificing a smooth factory ride. These shocks allow you to level your vehicle from 0 to 2.5 inches using adjustable spring seat tabs. Rear shocks accommodate up to 1 inch of lift to your vehicle.
The whole kit is very easy to install & is a direct bolt-on replacement for your factory shocks. By changing all four shocks you can enjoy a great performance from these shock absorbers on your truck. They have a lifetime warranty from the manufacturer.
- Not good if your car requires a lift higher than 2.5 inches.
5. Detroit Axle 171361
If you are looking for shocks that fit are designed to fit your 2004-2008 Ford F-150 4×4 models only, then Detroit Axle 171361 would be perfect for it. It is a complete front set assembly that is equipped with strut, soil, spring & mounts.
With the level of expertise Detroit has on ride control products, they have delivered on these front shocks. It is a complete kit, which means you are getting not only a shock absorber but also other necessities that will allow you to work on your suspension too. After replacing your vehicles with these shocks, you will feel like driving your vehicle when you first bought them.
It has a very easy installation process that doesn’t require any unique tools. You just have to remove & replace the complete strut in one piece. There is an installation guide that will help you if you are a newbie in the matter. Overall, you would get excellent performance from these shocks for Ford 150 4×4.
- Many felt that these shocks are a little softer than OEM shocks.
6. DTA 70017 Complete Struts
If you’re looking for a complete set for your Ford f150 suspension, then DTA 70017 would be a fine choice. The whole is not only loaded with shock absorbers, but it also has its own springs & mounts too. The front & rear pair of shocks work on a wide variety of f150 trucks.
The strut is made to contain nitrogen gas that is 4 Lip Teflon banded piston sealed. It is also a polished & chrome-plated piston rod. The fluid consisting in the strut is known as SV3 or others may call it all-weather fluid. It helps to keep your shock in the best of conditions.
The coil spring is heated, treated & powder coated to give you ultimate protection against corrosion. You will be enjoying a quiet comfortable ride with those insulated springs.
The design of the shocks reduces the installation time & also eliminates the need for compressing the springs. Overall these shocks will give a long life quality performance on your Ford f150.
- This is applicable for only Ford f150 4WD.
- Warranty information is not clear.
7. SENSEN 4061 Full Set of Shocks
SENSEN is a leading manufacturer in suspension & automobiles through their professional technicians worldwide. The strut has a twin-tube design & charged with nitrogen gas that helps to restore the original feel shocks for your f150 4×4. They have a fitment for 1997-2003 Ford F-150 4WD.
All the components of the SENSEN are manufactured to exceed the original equipment specifications standard & fitment. The shocks are powder-coated to resist any sort of corrosion. The quality control system is certified by ISO9001:2000 and ISO/TS 16949:2002.
The shocks will give you maximum shock performance & comfort. They engineered to give you better control of your vehicle & provide long life durability. They have a very easy install as well as a limited lifetime warranty on purchase too.
- They don’t fit all Ford f-150 models.
Buying Guide for Best Shocks for Ford f150 4×4
You need the proper knowledge to differentiate between the good, the bad & the ugly. So here are some of the top facts you need to keep in mind while searching for shocks for Ford f150 4×4.
Type of Shock
There are various types of shock in the market such as gas, air, standard, automatic, overload, and heavy-duty. You can use different types of shocks for your f150 according to your needs & style of performance.
But the thumb rule here is that the Ford f150 is a heavy-duty truck, so you will be using the vehicle on off-road travels. That’s why you should consider having a heavy-duty type of shock absorber that suits off-road conditions.
Different types of shock have various designs & have various types of compatibility.
You should make sure that the shocks are fit for your particular vehicle model as well as the year too. If you don’t match these criteria, then your newly purchased shocks would be a waste of money.
Height of Vehicle
The height of your Ford f150, the type of wheels & rims you are using have to be taken into account. If you are using larger wheels, then it will give a larger lift to your vehicles. Taking these into considerations, you need to see which of the shocks can tackle these specifications.
A vehicle that transports some goods & one driver is not the same as traveling with more passengers & larger amounts of goods. So, you need to take the weight of the total load including passengers into account. You need heavy-duty shocks for Ford f150 4×4 if you are traveling with more load.
There are two types of designs seen in shock absorbers.
This type of shock absorber has only one pressure tube with two dividing & working pistons. Monotube shocks can add support to the weight of the vehicle & the piston controls the compression. This design is suitable if you are going on rough conditions because the shock’s piston moves up & down to help the vehicle move.
Two tube shock absorber has two cylinders that contain shell & piston valve. The gas pressure is low due because of the base valve, so you can enjoy a comfortable ride. Your vehicle will achieve a decent stroke at minimum effort. Thus, allowing you to have a smooth ride along the road.
Usually, there are two types of materials used for shocks, steel or aluminum. Both of them are durable but they have some differences between them. Steel is more durable than aluminum because of the lightweight character of aluminum compared to steel. That’s why steel is much more reliable for construction.
A hint of corrosion or rust is death to the shock absorbers. So you need to make sure that the body of the shocks is coated properly. Many manufacturers use aluminum for the construction of the shock absorbers.
Aluminum is resistant to rust & corrosion because of its intrinsic nature. They don’t react to oxides in contact with moisture or water. This makes it durable as well as anti-resistant. Stainless steel works like a charm in this situation too. In fact, they are a better choice as they add some extra robustness.
Having an easy installation is essential when you are purchasing replacement shocks. Having said that, your shock should have an easy bolt-on installation with a proper installation guide too. Who would want to spend more money on hiring a professional, when you are already spending so much on getting quality shocks for Ford f150 4×4.
Warranty features on replacement shocks are necessary for the likelihood that your newly purchased shock comes in a bad shape. You may even never know about the defects after a few rides. That’s why we recommend the manufacturers that provide a 1 to 2-year warranty. Some manufacturers even give a lifetime warranty.
Q: When should I change my shocks?
Ans: The most common symptom that you will get is that you will occur heavy bounce. This is a sign that your shocks are not absorbing the impacts efficiently. If you’re loaded heavily at the back of the Ford f150 then scratching to the frame, oil leakage can also occur.
Q: Is it essential to replace all 4 shocks at the same time?
Ans: There no written rule that you have to change all your shocks at the same time. But you won’t be able to see any significant change if you replace them one after the other. That is why it is advised to change your shocks 2 by 2. If you change the front ones, change both of them. This will make sure the change is efficient.
Q: Are shocks & struts the same?
Ans: No, shocks & struts are not the same. But they do the same job of preventing & oscillating the vehicle by the support of a coil spring. Many vehicles have shocks at the rear side & struts at the front. So you need to be aware of what you are handling. You can’t interchange between shock & strut.
If you own a Ford f150, then you know what an important role the suspension system plays for proper control & smooth steering. But you would burn the candles at both ends if you are not aware of what’s good & what’s bad. There are tons of options around the market.
If riding on the rough roads is your habit, then Rancho RS999910 would be great to improve the quality of your rude. But if you are looking for a complete kit for the suspension system of your Ford f150, then the DTA 70017 & SENSEN 4061 would be a nice combo.
If you are new to this game, then your ignorance might cost you a lot of money. That’s why you should keep the build material, type & installation your top priority to get the best shocks for Ford f150 4×4 in the market.
You may also like to read –