Your Ford Ranger is your place of zen, your comfort zone. Without the best replacement shocks for ford rangers, it’ll be like a trampoline. Tires keep jumping off the road, even the steering will not be in your control without one of these. So, you understand how vital it is to set the very best for your beloved truck.
Shocks keep everything in and under control at a delicate precision and everything functional like it’s supposed to be. Keeping such complications under check can only be done by the very best. And so, we’ve talked about a couple of them below.
Table of Contents
Choose the Best Replacement Shocks for Ford Ranger
Ford Ranger is one of the best trucks in the entire world without any doubt. But the control and comfort of a truck chiefly dependent on the shock absorbers. Choosing an inappropriate one may cause great harm to your vehicle. Thus, we are here to review the best shocks to help you find the best fitting one for you Ranger.
1. Gabriel 43167 Rear Spring Assist Load Carrier Shocks
Admirable Aspects
This Gabriel 43167 comes with a combination of both spring and shock technology which will help to absorb the shock properly and keep the motion smooth. As the front coil springs are constant-rate, that will prevent shocks to reach the body and will help to restore to assure the proper height of the front portion.
The piston rod is made of chrome and super finished. So, it resists rust and offers a durable and strong experience. A better consistency wear surface of the piston head assures proper seal of lubrication and reduces corrosion. D.O.M tubing system reduces the area of internal wear that lessens the corrosion and increases lifetime.
This shock won’t increase the weight of the truck. The rear coils are variable-rate that will support 500 lbs. extra per pair of the capacity of load. But the increased capacity won’t exceed the gross vehicle weight rating. Sprigs are thick color coated that will decrease the weather vulnerability of the spring.
Drawbacks
- Painted coating of the notches can easily be removed.
- Mounting these shocks may increase the ride height slightly.
2. Monroe 32238 Monro-Matic Plus Shock Absorber
Admirable Aspects
This Monroe 32238 shock absorber is ready to suffice you with modifiers and all-weather fluid. So, it lessens friction between two arms and assures buttery rod reaction. Nitro carburized built rods are used in this absorber which is incredibly strong. ½ inch diameter piston rod makes the shock absorber strong and durable.
No extended hydraulic lockout reduces hassle and complexity. A 1-3/16 inch bore on the shock absorber makes it very convenient to control and force efficient. No extended bumper stop makes the shock-free to move. Proper shielding of the parts inside barely allows dust to enter and cause any damage.
This model is considered as one of the best replacement shocks for Ford Ranger 4*4. No visible spring is attached outside so it looks enough modern and compact. Shiny color coating adds to the beauty of the shock and saves the shock absorber from outside damage or from getting rust.
Drawbacks
- The color coating is not quite strong and durable.
3. Belltech 8000 SHOCK ABSORBER
Admirable Aspects
This Belltech 8000 shock absorber comes with oversized internal and external construction. So, this shock has strong stability and good durability. The durable metal-built body increases the strength and lifespan on a large scale. A totally covered dust boot assures perfect operating ambiance inside the metal hoods.
As the valve trains are cavitation free, it resists air from decreasing the effectiveness of the shock absorbers. OEM ride quality with enhanced performance offers great comfort and control onboard. OEM quality rubbers are included in the mounts, so it also omits small shocks and clutches the joints firmly.
Shiny and attractive black coating saves the shock absorber from dust and water. A perfect fitment guarantee is provided by the manufacturer. This product is among the best replacement shocks ranger 2wd of Ford. Important cautions and user notes are provided on the body of the shock absorbers.
Drawbacks
- The color coating doesn’t seem quite strong.
- These shocks substantially lower down the ride height.
4. Maxorber Full Set Shocks Struts Absorber Kit Compatible with Ford Ranger RWD 1998-2009
Admirable Aspects
This Maxorber shock absorber comes with a chromed rod which increases the durability and lifespan of the shock absorber. Such rods also resist the rods from getting rust. Special rust protection with a thick color coating of the tubes increases the durability hugely and saves the tubes from adverse weather.
Japanese made oil seals assure proper quality and reliable tightened seals and reduce friction between the surfaces. The seals are charged with nitrogen gas that can provide a fluent experience in harsh roads. Seamless cylinders lessen the chance of splitting and assures firm contact between the piston and cylinder.
Upgraded steering, stability, and stopping assure a safe and enjoyable ride. Protection from squealing noise reduces hassle while driving. These shock absorbers can provide strong dampening power for the loaded condition to assure proper control and offer a safe ride. Buckle holes are pretty convenient and assure quick installation.
Drawbacks
- Springs and mounts are not provided in this package.
- Color coating is neither thick enough nor strong.
5. Rancho RS5000X Gas Shock Set for Ford Ranger
Admirable Aspects
This Rancho RS5000X shock absorber comes with a unique rebound valving system that offers an exceptional and top-notch experience. As the valves are filled with gas, it provides buttery ride though on a harsh road. Each of the valves contains gas at the pressure of 150psi, so these valves can sustain a good load and sudden shocks.
As the twin tubes are gas-pressurized, this prevents foaming which causes damage to the valves. This gas-pressurized tube also provides support to the spring to retrieve. A large shock body allows the valves to maintain temperature effectively and helps the vehicle to operate in any road condition.
Progressive rebound and compression discs are attached in these valves. So, when the truck passes through a pothole or obstacle, it lowers down the initial shock and after that, the progressive flow of fluid helps it retrieve smoothly. Rubber guard and color coating prevent weather affiliated damage. The package includes apt mounts.
Drawbacks
- Dust guards are not strongly attached to the body.
- White body color is vastly vulnerable to dust and greases.
6. Monroe 32237 Monro-Matic Plus Shock Absorber
Admirable Aspects
This Monroe 32237 shock absorber has no visible spring outside, so it looks very minimalistic and decent. Nitro carburized rods are used in these shocks which are extremely strong and durable. ½ inch piston rod gives firm support to load and adds more strength to the shocks.
The bore of this shock is 1-3/16 inch which is larger than most of the shock. So, these shocks can provide more efficiency and consistent control of the vehicle. Since the tubes are filled with all-weather fluid, it can sustainably control the temperature. So, this makes the car more maneuverable in different conditions.
Special modifiers are mounted in this shock absorber that reduces the friction and assures smooth rod reaction at the same time. Shiny and thick color coating saves the shock absorber from dust, rust, greases, and offers an attractive look at the same time. Compatible mounts are provided with a package of this shock.
Drawbacks
- The color coating is not quite strong.
- The joint of the two movable parts is quite vulnerable to dust like sands and small pebbles.
7. Front and Rear Set Shocks, Struts for 90-97 Ford Ranger
Admirable Aspects
This SENSEN front and rear shock include Nitrogen gas filled twin tubes that absorb shock smoothly and release the force after the shock gradually. These shocks are welded with precision robots, so they are very much accurate, well-built, qualitative, and dependable. These shocks will help you restore factory ride height sustainably.
These shocks are designed to fit directly thus decreases your hassle greatly. Contact area inside of the bore covered with small isolating rings which demolishes friction by denying direct contact. SENSEN assures you proper servicing from the manufacturer without any hassle by providing a lifetime warranty.
Thick gray-colored coating saves the shocks from getting rust and offers a rugged look at the same time. As these shocks are ISO certified, you have nothing to worry about the build quality and services. Assurance of OE standards leaves no doubts about the build quality and reliability and provides an exceptional experience.
Drawbacks
- Compatible mounts are not provided.
- This product is substantially heavier than the other competitors.
FAQ
Q: How can someone know that he should change the shock absorbers?
Ans: Well, in terms of old shock absorbers, you need to hop up one corner and leave it. If it starts bouncing and it remains for a substantially long time, then it needs repair. But in current shock absorbers, you need to follow some signs such as leaking of hydraulic fluid, bouncing on tough roads, popping from shock when moving.
Q: Can a strut be used in the place of a shock?
Ans: Though the working principle of strut and shock is identical. But a car comes with the compatibility with either struts or the shocks. So, you can’t use a strut in the place of a shock.
Q: Can someone use different shocks in the same car?
Ans: You can mount shocks from a different brand but they need to be similar. But if you use shocks from the same brand, you can get perfect output.
Q: Hydraulic only shocks or nitrogen shocks, which are better?
Ans: Hydraulic shocks are softer and better for daily riding. But nitrogen shocks are the best for off-roading.
Final Words
You Ford Ranger’s efficiency, operability, comfort, and control vastly depend on the shock absorber. Having a tour of our buying guide and reviews, a healthy market map and idea should have taken its root. So, let’s move on to the quick suggestions to add to cart the best replacement shocks for Ford Ranger ‘you need’.
Rancho RS5000X Gas Shock is a quite good shock absorber according to user experience. This can provide you with a long life as it comes with dust guards. It performs quite well both on the road and off-road driving. Good temperature maintenance, attachment of progressive rebound, and compression discs make it heavy duty.
Monroe 32237 shock absorbers are also great for increased maneuverability for your car. These shocks are great for off-road driving because of their design and quality. If you are driving on the road always then Belltech 8000 is meant for you. Besides being well built, it enhances control on your wheels on road immensely.
Leave a Reply